Skip to main content

Lead the Runner: quarterback timing drill for flag football

Lead the Runner is a flag football drill that teaches passing timing to players ages 10 and up. A receiver runs across the field, and the quarterback throws through a cone gate early, so the catch comes in stride. You need 2 players: a quarterback and a receiver, plus 2 cones and 1 football.

Keep score and stats for your team with Flag50 Coach, then send parents one link to follow live. Launching spring 2027. Get early access.

By Jay Fraser. Published . Updated .

Lead the Runner at a glance

Ages
Ages 10 and up
Players
2: a quarterback and a receiver
Time
6 minutes
Equipment
2 cones, 1 football
Skill
Quarterback Timing
Difficulty
Intermediate

How to run Lead the Runner

A receiver runs across the field toward a 3-yard cone gate 6 to 8 yards downfield, and the quarterback throws through the gate early so the catch comes in stride.

Lead the Runner 3D walkthrough, opening frame: quarterback at the start line, receiver running across the field toward a gate of two cones 3 yards apart, 6 to 8 yards downfield

Motion data: CMU Graphics Lab Motion Capture Database (mocap.cs.cmu.edu)

  1. Set two cones 3 yards apart as a gate, 6 to 8 yards downfield. The receiver starts on the far side of the field, level with the gate.
  2. The receiver runs across the field toward the gate.
  3. The quarterback throws through the gate while the receiver is still short of it.
  4. The receiver catches the ball in stride while passing through. Rotate, and move the gate farther away to make it harder.

Safety: Run one receiver at a time, with the next receiver waiting off the field until the catch is made.

5 10 15 20 25 30 35 40 LOS QB WR
Lead the Runner setup: quarterback at the start line, receiver running across the field toward a gate of two cones 3 yards apart, 6 to 8 yards downfield

Coaching cue

Throw to where they will be, not where they are.
  • Throw to where the receiver will be, not where the receiver is.
  • A throw behind the receiver means the quarterback waited too long.

Common mistakes

  • Throws behind the receiver because the quarterback waited.
  • The receiver slows down to wait for the ball.
  • Throwing too high, so the receiver has to stop and jump.

Make it easier or harder

Make it easier: Have the receiver jog across, so the quarterback learns the lead at a slower speed.

Make it harder: Move the gate farther downfield, or have the receiver run at full speed.

For your players

Read these three lines to your players before the first rep.

  1. Watch your receiver start running.
  2. Throw the ball to the cones, out in front of them.
  3. They should catch it without slowing down.

Where it shows up in a game

Crossing routes and drags: a ball thrown in front of the receiver keeps the receiver running after the catch.

Flag50 Coach

Keep score and stats for your team with Flag50 Coach, then send parents one link to follow live.

Get early access. Leave your email and we'll email you the moment your spot opens up.

Frequently asked questions

How wide should the gate be for Lead the Runner?

Set the two cones 3 yards apart, 6 to 8 yards downfield. A narrower gate makes the throw harder, so close it to 2 yards once the quarterback hits the gate 5 times in a row.

How do you teach a quarterback to lead a receiver?

Give the quarterback a spot to throw to instead of a player, like the cone gate in this drill. The quarterback throws to the spot while the receiver is still short of it, so the ball and the receiver arrive together.

What does it mean when every throw lands behind the receiver?

The quarterback is waiting too long and throwing at the receiver instead of the spot ahead. Have the quarterback release the ball when the receiver is still 3 or 4 steps from the gate.

Sources

About the author

Jay Fraser

Founder, Flag50

Founder of Flag50, based in Carlsbad, California.